Home / Guides / EU Machinery Regulation

CE marking under Machinery Regulation 2023/1230 (Articles 23 and 24)

For machines placed on the market or put into service from 20 January 2027, the CE marking means conformity with Regulation (EU) 2023/1230, not Directive 2006/42/EC. This guide explains when and how to affix it, when the notified body number follows it, what else must be on the rating plate, what changed from the Directive and the mistakes market surveillance looks for.

Written by Proxom Engineering Ltd, a UK mechanical design engineering company. Checked on 14 November 2026 against the consolidated text of Regulation (EU) 2023/1230 on EUR-Lex (version of 27 July 2026, as amended by Regulations (EU) 2024/2748 and 2026/1744, neither of which changes Articles 23 and 24), Regulation (EC) No 765/2008 and Directive 2006/42/EC. The pending Omnibus IV amending proposal (2025/0134(COD)) was not adopted on that date; this guide follows the text in force. General information, not legal advice.

The short answer

  1. For machinery and related products placed on the market or put into service from 20 January 2027, the CE marking is governed by Articles 23 and 24 of Regulation (EU) 2023/1230, which replace Article 16 and Annex III of Directive 2006/42/EC.
  2. Affix it only after the technical documentation (Annex IV, Part A) is drawn up, the conformity assessment (Article 25) is done and the EU declaration of conformity (Article 21) is signed (Article 10(2)), and before the machine is placed on the market or put into service (Article 24(2)).
  3. It must be visible, legible and indelible on the machine itself; only where that is not possible or not warranted by the nature of the product may it go on the packaging and the accompanying documents (Article 24(1)).
  4. Where a notified body took part (module B + C, H or G under Article 25(2) or 25(3)), the CE marking is followed by the body's identification number (Article 24(3)). Under internal production control (module A) there is no number.
  5. Form and size come from Annex II of Regulation (EC) No 765/2008: the drawn proportions of the letters CE, at least 5 mm high (Article 23 of the Regulation refers to Article 30 of that Regulation).
  6. Partly completed machinery does not get a CE marking under the Regulation: it gets a declaration of incorporation and assembly instructions (Article 11). Other EU law that applies to it may still require CE marking under that law.

What Articles 23 and 24 say

Article 23: the CE marking is subject to the general principles in Article 30 of Regulation (EC) No 765/2008.

Article 24(1): the CE marking is affixed visibly, legibly and indelibly to the machinery or related product. Where that is not possible or not warranted on account of its nature, it is affixed to the packaging and to the accompanying documents. Article 24(2): it is affixed before the product is placed on the market or put into service. Article 24(3): where conformity is assessed under Article 25(2), points (a), (b) and (c), or Article 25(3), points (b), (c) and (d), the CE marking is followed by the identification number of the notified body involved. Article 24(4): the CE marking and any notified body number may be followed by a pictogram or other marking indicating a special risk or use. Article 24(5): Member States act against improper use of the marking.

Paraphrased. Article 3 defines the CE marking as a marking by which the manufacturer indicates that the product conforms with the applicable requirements of EU harmonisation legislation providing for its affixing. Article 10(2) ties it to the paperwork: the CE marking is affixed once conformity with Annex III has been demonstrated by the conformity assessment and the EU declaration of conformity has been drawn up.

Nine rules for the CE marking

RuleSourceWhat it means for you
Only the manufacturer or its authorised representative affixes the CE markingReg. 765/2008 Art. 30(1)An importer or distributor does not affix it; it checks that it is there (Articles 13(2) and 15(2)(a)). If an importer or distributor places a machine on the market under its own name or trade mark, or modifies it so that compliance may be affected, it is considered the manufacturer and takes over the manufacturer's obligations (Article 17).
Only on products whose EU harmonisation law provides for itReg. 765/2008 Art. 30(2)Do not put a CE marking under the Machinery Regulation on partly completed machinery, on spare parts that are not related products, or on products outside the Regulation's scope (Article 2).
It covers all EU law that appliesReg. 765/2008 Art. 30(3); Reg. 2023/1230 Art. 21(3)By affixing it you take responsibility for conformity with every applicable act that provides for CE marking (for example EMC 2014/30/EU or radio equipment 2014/53/EU). There is one CE marking and one EU declaration of conformity listing all those acts.
It is the only conformity marking for EU harmonisation lawReg. 765/2008 Art. 30(4)-(5)Other marks (your logo, test house marks, approval marks) are allowed only if they do not mislead about the meaning or form of the CE marking and do not impair its visibility, legibility and meaning.
Visible, legible and indelible, on the machineReg. 2023/1230 Art. 24(1)Engraved, embossed, stamped or printed on a durable rating plate fixed to the machine. Packaging and accompanying documents only where marking the product itself is not possible or not warranted.
Before placing on the market or putting into serviceReg. 2023/1230 Art. 24(2)For an assembly or a machine built for your own use, the moment that counts may be putting into service. Do not ship a CE-marked unit before the declaration is signed.
Notified body number after the CE markingReg. 2023/1230 Art. 24(3)Applies to the procedures in Article 25(2)(a)-(c) and 25(3)(b)-(d): module B + C, module H and module G.
Pictograms for special risk or use may followReg. 2023/1230 Art. 24(4)For example a marking for use in potentially explosive atmospheres where other EU law requires it. They come after the CE marking and any notified body number.
Form and minimum sizeReg. 765/2008 Annex IIUse the official drawing; keep its proportions when you scale it; at least 5 mm high where specific legislation sets no other size.

Does a notified body number follow the CE marking?

That depends on the conformity assessment route in Article 25. Only machinery listed in Annex I can need a notified body.

RouteWhen it is usedWhat follows the CE marking
Module A, internal production control (Annex VI)Machinery not listed in Annex I (Article 25(4)); or Annex I, Part B machinery designed and built to harmonised standards cited in the OJ or common specifications specific to that category and covering all relevant requirements (Article 25(3)(a))CE only. No notified body number.
Module B + C, EU type-examination (Annex VII) followed by conformity to type based on internal production control (Annex VIII)Annex I, Part A (Article 25(2)(a)); Annex I, Part B without such standards or specifications (Article 25(3)(b))CE followed by the identification number of the notified body involved in that procedure (Article 24(3)). Agree with the body that issued the EU type-examination certificate how the number is shown.
Module H, full quality assurance (Annex IX)Annex I, Part A (Article 25(2)(b)) or Part B (Article 25(3)(c))CE followed by the number of the notified body that assesses your quality system. Annex IX, point 5.1: the manufacturer affixes the number under that body's responsibility.
Module G, unit verification (Annex X)Annex I, Part A (Article 25(2)(c)) or Part B (Article 25(3)(d))CE followed by the number of the notified body that verified the unit. Annex X, point 5.1: affixed under that body's responsibility.

As at 14 November 2026 no harmonised standards had been cited in the Official Journal under Regulation (EU) 2023/1230 (the Commission expects a first list; see the Commission's harmonised standards page for machinery). Without a cited category-specific standard or common specification, an Annex I, Part B machine cannot use module A and needs B + C, H or G, and so a notified body number. Article 46(1)(c) refers to the number of the notified body involved in the production control phase; for module B + C, agree with your notified body how the number is shown. See our Annex I conformity assessment guide.

What else must be on the machine

The CE marking is one line of the rating plate. Articles 10 and 13 and section 1.7.3 of Annex III add the rest; section 1.7.3 applies to every machine, whatever the risk assessment says (Annex III, Part B, point 2).

ParticularSourceNote
CE marking (and notified body number where applicable)Art. 24(1), 24(3)Official form, at least 5 mm high.
Designation of the model, series or typeArt. 10(5)Use the same designation as on the EU declaration of conformity (Annex V, Part A, item 1).
Year of constructionArt. 10(5)The year in which the manufacturing process was completed, not the year of the design or of the order.
Batch or serial number, or other element allowing identification, where one existsArt. 10(5)If size or nature of the product does not allow it, give the information on the packaging or in an accompanying document.
Manufacturer's name, registered trade name or registered trade markArt. 10(6)On the machine; on the packaging or in an accompanying document only where that is not possible.
Manufacturer's postal address and website, e-mail address or other digital contactArt. 10(6)New compared with the Directive: a digital contact must be given, and the address must indicate a single contact point.
Importer's name, registered trade name or trade mark and contact detailsArt. 13(3)Only for machinery imported into the EU (or Northern Ireland): name, postal address and website, e-mail or other digital contact of the importer, in a language easily understood by users and market surveillance authorities. On the machine; on the packaging or in an accompanying document only where that is not possible.
How to access the digital instructionsArt. 10(7)(a)Only if you supply the instructions in digital format: a URL or a QR code on the machine (or, where that is not possible, on the packaging or an accompanying document).
Mass of parts handled with lifting equipment; marking for potentially explosive atmospheres; information essential for safe useAnnex III, 1.7.3Section 1.7.3 always applies to machinery (Annex III, Part B, point 2). Warnings and safety information follow the language rules of section 1.7.1.
Extra markings of Chapters 2 to 6Annex III, 1.7.3 second para.For example nominal power in kW and mass for mobile machinery (3.6.2) and the maximum working load for lifting machinery (Chapter 4).

Worked example: one rating plate

Palletising cell PX-00 (fictional): the rating plate and what sits behind itModule A, no notified body
01
Machine Fictional palletising cell PX-00, built in 2027 by a fictional UK builder and supplied to the EU through an importer in the Netherlands. Not listed in Annex I, so module A (Article 25(4)).
02
CE marking Official form, 12 mm high, laser-engraved on a stainless rating plate riveted to the control cabinet. No notified body number, because no notified body was involved.
03
Identification Type PX-00, serial number PX00-0142, year of construction 2027 (the year the cell was completed and tested, Article 10(5)).
04
Manufacturer Name, postal address and e-mail address of the builder (Article 10(6)).
05
Importer Name and contact details of the Dutch importer on a second plate next to the first (Article 13(3)).
06
Instructions QR code with the address of the digital instructions page (Article 10(7)(a)), with the paper safety information in the box where required.
07
Other markings Electrical rating (supply voltage, frequency, full-load current) as required by the electrical standard the builder applies; mass of the removable gripper head handled by crane (Annex III, 1.7.3).
08
Paper trail Signed EU declaration of conformity (Annex V, Part A) for type PX-00 dated before the first unit is supplied; technical file under Annex IV, Part A; photo of the fitted plate filed with the serial number.
Fictional example. The electrical rating comes from the electrical standard you apply, not from Article 10; check every marking against the standards and other EU law that apply to your machine.

What changed from the Directive

TopicDirective 2006/42/ECRegulation 2023/1230
Where the rules areArticle 16 and Annex III of the DirectiveArticles 23 and 24, plus Article 30 and Annex II of Regulation (EC) No 765/2008
What must be on the machineAnnex I, section 1.7.3: business name and full address, designation, CE marking, series or type, serial number, year of constructionArticle 10(5) and (6) (identification and contact details, now including a website, e-mail or other digital contact) and Article 24; section 1.7.3 keeps the additional markings; importers add their own details (Article 13(3))
Position of the CE markingAnnex III: in the immediate vicinity of the name of the manufacturer or authorised representative, using the same techniqueArticle 24 does not repeat this rule. Keeping the CE marking next to your name on the same rating plate is still sensible, because it shows who takes responsibility for the marking.
Minimum size5 mm; the minimum may be waived for small-scale machineryAt least 5 mm where specific legislation sets no other size (765/2008 Annex II). Where marking the product is not possible or not warranted, the marking goes on the packaging and accompanying documents (Article 24(1)).
Notified body numberAnnex III: required only where the full quality assurance procedure (Annex X; Article 12(3)(c) and 12(4)(b)) was applied; not for EC type-examinationRequired after the CE marking for module B + C, H and G (Article 24(3)), so now also for type-examination (B + C) and unit verification (G)
DatesAnnex I, 1.7.3: pre-dating or post-dating the machinery when affixing the CE marking is prohibitedThe year of construction is defined as the year the manufacturing process was completed (Article 10(5)). Use that year; never the year you expect to sell the unit.
Formal non-complianceArticle 17Article 46(1): wrong or missing CE marking, wrong or missing notified body number, missing or incorrect declaration, incomplete technical documentation, missing or false Article 10(6) or 13(3) contact details, other administrative requirements

Checklist before you affix the CE marking

  1. Confirm the product needs a CE marking under the Regulation: it is machinery or a related product in scope (Articles 2 and 3), not partly completed machinery.
  2. Finish the technical documentation (Annex IV, Part A) and the conformity assessment (Article 25): module A, or B + C, H or G with a notified body.
  3. Sign the EU declaration of conformity (Article 21, Annex V, Part A) listing every EU act that applies; one declaration for all of them (Article 21(3)).
  4. Lay out the rating plate: CE marking in the official form (at least 5 mm), notified body number if any, model or type, serial number, year of construction, your name, postal address and digital contact.
  5. Use a durable, indelible method: engraving, embossing, etching or a tested label material suited to the environment; avoid paper stickers.
  6. Add the other markings: digital instructions access (if used), importer details (if imported), mass of handled parts, Chapter 2 to 6 markings and any explosive-atmosphere marking.
  7. Check nothing misleads: no marks that look like CE, no CE marking on parts or sub-assemblies that are not themselves products requiring it.
  8. Fit the plate before shipping, photograph it and file the photo with the serial number in the technical file.

Questions

When do I need a CE marking under the Machinery Regulation rather than the Directive?

For each unit placed on the market or put into service from 20 January 2027 (Article 54). Units placed on the market under the Directive before that date keep their Directive CE marking and declaration (Article 52(1)). The decision is made per unit, not per model. See our Article 52 guide.

Does my CE marking have to look different from 2027?

The letters CE are the same: the form and proportions come from Annex II of Regulation (EC) No 765/2008, at least 5 mm high. What changes is the legal basis (Articles 23 and 24 of the Regulation), the notified body number, which under the Directive followed the CE marking only after full quality assurance and now follows it for module B + C, H and G (Article 24(3)), and the identification and contact details next to it (Article 10(5) and (6)). Your declaration of conformity must refer to Regulation (EU) 2023/1230 instead of the Directive.

When does the notified body number follow the CE marking?

When conformity is assessed under Article 25(2), points (a) to (c), or Article 25(3), points (b) to (d): module B + C, module H or module G for Annex I machinery. Under module A (all machinery not in Annex I, and Annex I, Part B machinery built fully to cited harmonised standards or common specifications specific to that category) there is no number. Notified bodies and their four-digit numbers are listed in the Commission's NANDO database.

Can I put the CE marking only in the manual or on the packaging?

Only where affixing it to the machine is not possible or not warranted on account of the nature of the product (Article 24(1)); then it goes on the packaging and on the accompanying documents. For normal industrial machinery a rating plate on the machine is expected.

Does partly completed machinery carry a CE marking?

Not under the Machinery Regulation. Article 11 requires the manufacturer of partly completed machinery to draw up the Annex IV, Part B documentation, the assembly instructions (Annex XI) and the EU declaration of incorporation, and to mark identification and contact details (Article 11(5) and (6)), but not a CE marking. If other EU law that provides for CE marking applies to it, for example the ATEX Directive 2014/34/EU or the radio equipment Directive 2014/53/EU, CE marking under that law is still needed. See our partly completed machinery guide.

I integrate CE-marked machines into a line. Which CE marking counts?

The integrator of an assembly of machinery is its manufacturer: the assembly needs its own conformity assessment, declaration of conformity and CE marking. The supplied machines keep their own CE markings and plates. File their declarations in your technical file.

Who may affix the CE marking for a machine built outside the EU?

The manufacturer or its authorised representative (Article 30(1) of Regulation (EC) No 765/2008). The EU importer does not affix the CE marking: it checks before placing the machine on the market that the conformity assessment was carried out, the technical documentation exists, the CE marking is there and the documents are supplied, and adds its own name and contact details (Article 13). See our importer guide.

What happens if the CE marking is wrong or missing?

Market surveillance authorities require the economic operator to end the non-compliance (Article 46(1)): for example a CE marking affixed in breach of Article 24 or of Article 30 of Regulation (EC) No 765/2008, a missing CE marking, a missing or wrong notified body number, a missing or incorrect declaration, or incomplete technical documentation. If it persists, the Member State takes all appropriate measures to restrict or prohibit making the machine available on the market, or ensures that it is recalled or withdrawn (Article 46(3)). Member States also lay down penalties for infringements by economic operators (Article 50); the obligation to have those rules in place applies from 20 October 2026 (Article 54), and the obligations they sanction apply from 20 January 2027.

What marking applies in Northern Ireland and Great Britain?

The Regulation applies in Northern Ireland under the Windsor Framework, with CE marking. Where a UK notified body carries out the Regulation's procedure for the Northern Ireland market, the UK(NI) indication is affixed next to the CE marking, and such a product may not be placed on the EU market. In Great Britain, SI 2026/867 replaces regulation 12A of the Supply of Machinery (Safety) Regulations 2008 from 20 January 2027: CE marking in GB then means meeting Regulation 2023/1230; UKCA stays a separate GB option. See our UK guide.

Related guides: Annex III requirements list · Declaration of conformity contents · Harmonised standards (Article 20) · Conformity assessment (Annex I) · Technical file under Annex IV · Transition (Article 52) · Digital instructions · Importers · Distributors (Article 15) · Regulation vs Directive · Manufacturer obligations (Article 10) · Market surveillance and penalties. We sell to businesses only; see Terms. Always verify against the official text of Regulation (EU) 2023/1230 on EUR-Lex.