Home / Guides / EU Machinery Regulation

Scope of Machinery Regulation 2023/1230: what it covers and what is excluded (Article 2)

The first question for every product you ship to the EU from 20 January 2027: is it machinery, a related product, partly completed machinery, or excluded? Article 2 and the Article 3 definitions, point by point, with what changed from the Machinery Directive.

Written by Proxom Engineering Ltd, a UK mechanical design engineering company. Checked on 20 November 2026 against the text of Regulation (EU) 2023/1230 on EUR-Lex (OJ text and consolidated version of 27 July 2026; Article 2 is the same in both, and the two amending acts in the consolidated version, Regulations (EU) 2024/2748 and 2026/1744, do not change it; the dates in Article 54 are those set by the corrigendum of 4 July 2023) and Directive 2006/42/EC. The pending Omnibus IV amending proposal (2025/0134(COD)) was not adopted on that date; this guide follows the text in force. General information, not legal advice: borderline products need a case-by-case decision by the manufacturer.

The short answer

  1. Three groups are in scope (Article 2(1)): machinery; five related products (interchangeable equipment, safety components, lifting accessories, chains, ropes and webbing, removable mechanical transmission devices); and partly completed machinery. The Regulation calls them together 'products within the scope of this Regulation'.
  2. Machinery (Article 3, point (1)) is essentially an assembly of linked parts, at least one of which moves, joined for a specific application and fitted or intended to be fitted with a drive system other than directly applied human or animal effort. It also covers assemblies missing only the parts to connect them on site or to energy, assemblies that can only function once mounted on a means of transport or installed in a building or structure, assemblies of machines arranged and controlled to function as an integral whole, manual lifting machines, and (new) an assembly missing only the upload of the software for its specific application.
  3. Article 2(2) lists 17 exclusions, points (a) to (q): for example fairground equipment, weapons, aircraft, ships and rail vehicles (but not machinery mounted on them), road vehicles, tractors and two- and three-wheel vehicles covered by their own type-approval rules (again except machinery mounted on them), machinery specially designed and constructed for military or police purposes or for temporary laboratory research, mine winding gear, and some electrical products covered by the Low Voltage or Radio Equipment Directive.
  4. An exclusion is read narrowly and point by point. Most have conditions ('specially designed', 'insofar as', 'except for machinery mounted on'). A crane on a truck, a 3D printer and electrically operated furniture are examples of products that the exclusion wording itself keeps out of the exclusion; if they meet the definition of machinery, the Regulation applies.
  5. Other EU law can take over part of the risks. Where a more specific Union harmonisation act covers some of the Annex III risks, the Regulation does not apply to the product to that extent (Article 9). Other acts (for example electrical, EMC or radio rules) can also apply alongside the Regulation for risks it does not cover.
  6. Dates. The Regulation applies from 20 January 2027 (Article 54, date as corrected by corrigendum; 14 January 2027 in the original OJ text). Until then, machinery is placed on the market under Directive 2006/42/EC, whose Article 1 scope is very similar.

What is in scope: the Article 3 definitions

Paraphrased from the Official Journal text. A product has to meet one of these definitions before the exclusions matter.

ProductArticle 3Meaning
Machinery3(1)(a)-(f)Assembly with a drive system other than directly applied human or animal effort, linked parts, at least one moving, joined for a specific application; also (b) missing only the components to connect it on site or to energy and motion, (c) able to function only once mounted on a means of transport or installed in a building or structure, (d) assemblies of machinery or partly completed machinery arranged and controlled to function as an integral whole, (e) manual lifting assemblies, and (f) any of these missing only the upload of the software intended for the specific application.
Interchangeable equipment3(2)A device the operator assembles with machinery or an agricultural or forestry tractor after it is put into service, to change its function or give it a new one; not a tool.
Safety component3(3)A physical or digital component, including software, designed or intended to fulfil a safety function, independently placed on the market, whose failure or malfunction endangers persons, and which is not necessary for the product to function (or can be replaced by normal components). Annex II gives an indicative list of 20 items, including 'software ensuring safety functions' (18) and safety components with self-evolving behaviour using machine learning (19).
Lifting accessory3(5)Component or equipment not attached to the lifting machinery that enables the load to be held, placed between the machinery and the load or on the load, or intended to be an integral part of the load, and independently placed on the market; includes slings and their components.
Chains, ropes and webbing3(6)-(8)Designed and constructed for lifting purposes as part of lifting machinery or lifting accessories.
Removable mechanical transmission device3(9)Removable component transmitting power between self-propelled machinery or a tractor and other machinery or related products, joining them at the first fixed bearing; placed on the market with a guard, the two are one item.
Partly completed machinery3(10)An assembly that is not yet machinery because it cannot in itself perform a specific application, and is only intended to be incorporated into or assembled with machinery, other partly completed machinery or equipment.

The 17 exclusions of Article 2(2)

Paraphrased from the Official Journal text. The right-hand column is our reading of the wording, not text from the Regulation.

PointExcludedWhat to watch
2(2)(a)Safety components intended as spare parts to replace identical components, supplied by the manufacturer of the original machinery, related product or partly completed machinery.Only identical replacements from the original manufacturer. A different or improved safety component, or one from another supplier, is not covered by this exclusion.
2(2)(b)Specific equipment for use in fairgrounds or amusement parks.'Specific' equipment: ordinary machinery that happens to be used at a fairground is not excluded by this point.
2(2)(c)Machinery and related products specially designed for use within, or used in, a nuclear installation, whose conformity with the Regulation may undermine the nuclear safety of that installation.Two conditions: the nuclear link and the possible effect on nuclear safety. The Directive wording was different (machinery for nuclear purposes whose failure may result in an emission of radioactivity).
2(2)(d)Weapons, including firearms.Recital 16: to avoid legislating twice on products under Directive (EU) 2021/555.
2(2)(e)Means of transport by air, on water and on rail networks.Machinery mounted on those means of transport stays in scope.
2(2)(f)Aeronautical products, parts and equipment within the scope of Regulation (EU) 2018/1139 and within the definition of machinery, insofar as Regulation (EU) 2018/1139 covers the relevant essential health and safety requirements of this Regulation.New compared with the Directive. 'Insofar as': only to the extent that the aviation rules cover the relevant requirements.
2(2)(g)Motor vehicles and their trailers, and their systems, components, separate technical units, parts and equipment, within the scope of Regulation (EU) 2018/858.Except machinery mounted on those vehicles (for example a loader crane or a tail lift). Recital 17: road vehicles not subject to EU type-approval, such as e-bikes, e-scooters and other personal mobility devices, are covered by the Regulation, except for risks arising from circulation on public roads.
2(2)(h)Two- or three-wheel vehicles and quadricycles, and their systems, components, separate technical units, parts and equipment, within the scope of Regulation (EU) No 168/2013.Except machinery mounted on those vehicles.
2(2)(i)Agricultural and forestry tractors, and their systems, components, separate technical units, parts and equipment, within the scope of Regulation (EU) No 167/2013.Except machinery mounted on those tractors. Interchangeable equipment for tractors is a related product in scope (Article 3, point (2)).
2(2)(j)Motor vehicles exclusively intended for competition.'Exclusively'.
2(2)(k)Seagoing vessels and mobile offshore units, and machinery installed on board such vessels or units.Here machinery on board is excluded too, unlike points (e), (g), (h) and (i).
2(2)(l)Machinery or related products specially designed and constructed for military or police purposes.'Specially designed and constructed': standard machinery bought by the armed forces or the police is not excluded by this point.
2(2)(m)Machinery or related products specially designed and constructed for research purposes for temporary use in laboratories.All three conditions: research purpose, temporary use, in laboratories. A pilot production line, or machinery for regular production, will normally not meet them.
2(2)(n)Mine winding gear.Unchanged from the Directive.
2(2)(o)Machinery or related products intended to move performers during artistic performances.Unchanged in substance from the Directive.
2(2)(p)Electrical and electronic products, insofar as they fall within the scope of Directive 2014/35/EU (low voltage) or Directive 2014/53/EU (radio equipment): (i) household appliances intended for domestic use which are not electrically operated furniture; (ii) audio and video equipment; (iii) information technology equipment; (iv) ordinary office machinery, except additive printing machinery for producing three-dimensional products; (v) low-voltage switchgear and control gear; (vi) electric motors.Electrically operated furniture and 3D printers are written out of this exclusion. Recital 18: appliances with Wi-Fi covered as radio equipment are excluded too. Industrial and professional machines are not 'household appliances intended for domestic use'. 'Insofar as': a product outside both Directives (for example outside the Low Voltage Directive voltage limits and without a radio function) is not excluded by this point.
2(2)(q)High-voltage electrical products: (i) switchgear and control gear; (ii) transformers.Unchanged in substance from the Directive.

When other EU law takes over

Article 9: where the risks addressed by the Annex III essential health and safety requirements are wholly or partly covered by Union harmonisation legislation that is more specific than this Regulation, the Regulation does not apply to that product to the extent that the specific legislation covers those risks. Recital 22 adds the other side: a product can present risks the Regulation does not deal with (the example given is risks specific to a Wi-Fi function); those risks fall to other legislation, such as the Radio Equipment Directive.

The Regulation also does not stop Member States from setting rules to protect persons, including workers, when they install or use machinery, as long as those rules do not allow the machine to be modified in a way that is not compatible with the Regulation (Article 5).

When the rules bite

The obligations attach to products being placed on the market (the first making available on the Union market, Article 3, point (12)) or put into service (the first use, for its intended purpose, in the Union, Article 3, point (13)). A machine built for your own use is covered, because you are then its manufacturer (Article 3, point (18)(b)). Modifying a machine already in use can make you its manufacturer too: see our substantial modification guide. For machines placed on the market under the Directive before 20 January 2027, see our Article 52 guide.

What changed from the Machinery Directive

TopicDirective 2006/42/ECRegulation (EU) 2023/1230
Products in scopeArticle 1(1): seven products (a) to (g); Article 2 uses 'machinery' for (a) to (f)Article 2(1): machinery, five 'related products' and partly completed machinery (same seven products, regrouped; recital 15)
SoftwareNot in the definitionsMachinery missing only the software upload is machinery (Article 3, point (1)(f)); safety components can be digital, including software (Article 3, point (3); recital 19)
Drive systemsArticle 2(g): 'A drive system is partly completed machinery'No such sentence in the Article 3, point (10) definition
Safety component listAnnex V, indicative listAnnex II, indicative list of 20 items; it includes software ensuring safety functions and safety components with self-evolving behaviour using machine learning (in line with recital 19 on digital safety components)
Spare-part exclusionIdentical safety components supplied by the manufacturer of the original machineryAdds the original related product or partly completed machinery
NuclearMachinery for nuclear purposes whose failure may result in an emission of radioactivityProducts specially designed for use within, or used in, a nuclear installation whose conformity may undermine nuclear safety
Aircraft productsOnly 'means of transport by air'Adds aeronautical products within Regulation (EU) 2018/1139, insofar as that Regulation covers the relevant requirements
Vehicles and tractorsMotor vehicles, trailers and two- or three-wheel vehicles covered by the type-approval directives of the time; tractors only for the risks covered by Directive 2003/37/EC; machinery mounted on them in scopeVehicles, trailers, tractors, two- and three-wheel vehicles and quadricycles plus their systems, components, separate technical units, parts and equipment under Regulations 2018/858, 168/2013 and 167/2013; machinery mounted on them stays in scope
Electrical productsHousehold appliances, audio/video, IT, ordinary office machinery, LV switchgear, electric motors, insofar as covered by Directive 73/23/EECSame list under Directives 2014/35/EU or 2014/53/EU, but electrically operated furniture (point (i)) and additive printing machinery for three-dimensional products (point (iv)) are expressly carved out of the exclusion; the Directive had no such carve-outs

Scope check before 20 January 2027

  1. List every product you supply and give each a scope line: machinery, which related product, partly completed machinery, or excluded (with the Article 2(2) point and the condition that applies).
  2. Read each exclusion with its conditions: 'specially designed', 'insofar as', 'exclusively', 'except for machinery mounted on'. If one condition is not met, the exclusion does not apply.
  3. Check software. If the machine only lacks the application software you upload later, it is machinery, not partly completed machinery (Article 3, point (1)(f)). Safety software you sell on its own can be a safety component.
  4. Check equipment you sell separately: attachments (interchangeable equipment), slings, chains and ropes for lifting, PTO shafts with their guards, and stand-alone safety devices are in scope in their own right.
  5. Decide machinery or partly completed machinery for every assembly you ship. The paperwork differs: EU declaration of conformity and CE marking, or EU declaration of incorporation and assembly instructions.
  6. Check the other EU acts that may apply as well (for example electrical, EMC or radio equipment rules) or that cover some risks more specifically (Article 9).
  7. Write the result down in the technical file so the reasoning is on record.

Questions

What products does Machinery Regulation 2023/1230 apply to?

Article 2(1) covers machinery, five related products (interchangeable equipment, safety components, lifting accessories, chains, ropes and webbing, and removable mechanical transmission devices) and partly completed machinery. The Regulation calls them together 'products within the scope of this Regulation'. Article 2(2) then lists 17 exclusions.

What is excluded from the Machinery Regulation?

Article 2(2) points (a) to (q): identical safety spare parts from the original manufacturer, specific fairground and amusement park equipment, certain nuclear-installation products, weapons, means of transport by air, water and rail, certain aeronautical products, road vehicles, two- and three-wheel vehicles and quadricycles and agricultural and forestry tractors within their type-approval rules, competition vehicles, seagoing vessels and offshore units, machinery specially designed for military or police purposes or for temporary laboratory research, mine winding gear, machinery moving performers, certain low-voltage and radio electrical products, and high-voltage switchgear and transformers. Most points have conditions.

Is machinery mounted on a truck or tractor excluded?

No. The exclusions for means of transport by air, water and rail, for motor vehicles and trailers, for two- and three-wheel vehicles and for agricultural and forestry tractors each say 'except for machinery mounted on' them. A loader crane on a truck is therefore in scope. Seagoing vessels are different: machinery installed on board is excluded too.

Does the Machinery Regulation cover software?

Yes, in two ways. An assembly missing only the upload of the software for its specific application is machinery (Article 3, point (1)(f)). And a safety component can be physical or digital, including software, if it is independently placed on the market (Article 3, point (3)); Annex II lists 'software ensuring safety functions'. Recital 19 adds that the software for the first case is the subject of the conformity assessment procedure of the machinery.

Are 3D printers covered by the Machinery Regulation?

The exclusion for ordinary office machinery under the Low Voltage or Radio Equipment Directive in Article 2(2)(p)(iv) expressly does not cover 'additive printing machinery for producing three-dimensional products'. So a 3D printer that meets the definition of machinery is not taken out of scope by that point.

Is electrically operated furniture covered?

Article 2(2)(p)(i) excludes household appliances intended for domestic use 'which are not electrically operated furniture'. Electrically operated furniture is therefore not excluded by that point; if it meets the definition of machinery, the Regulation applies.

Is a drive system or a robot arm partly completed machinery?

The Directive said in its definition that a drive system is partly completed machinery; the Regulation's definition (Article 3, point (10)) has no such sentence. The test is whether the assembly can in itself perform a specific application and whether it is only intended to be incorporated into machinery. Decide case by case and record the reasoning.

Does the Regulation apply to machines we build for our own use?

Yes. Under Article 3, point (18)(b), a person who manufactures products within the scope of the Regulation and puts them into service for its own use is a manufacturer. 'Putting into service' is the first use in the Union for the intended purpose (Article 3, point (13)).

Are e-bikes and e-scooters covered by the Machinery Regulation?

Recital 17 says that means of transport by road not yet covered by a specific Union legal act should be regulated by the Regulation, except in respect of risks that might arise from circulation on public roads. It names e-bikes, e-scooters and other personal mobility devices that are not subject to EU type-approval. Vehicles within EU type-approval are excluded by Article 2(2)(g) and (h), except machinery mounted on them.

Can we show a machine at a trade fair before it complies?

Yes, under Article 4(2), if a visible sign clearly says that it does not comply and will not be made available on the market until brought into conformity. Adequate measures must protect persons during demonstrations.

Related guides: Regulation vs Directive · Partly completed machinery · Manufacturer obligations (Article 10) · Conformity assessment and Annex I · Substantial modification (Article 18) · Transitional provisions (Article 52) · Annex III requirements list · US and non-EU builders · UK machine builders. We sell to businesses only; see Terms. Always verify against the official text of Regulation (EU) 2023/1230 on EUR-Lex.