Written by Proxom Engineering Ltd, a UK mechanical design engineering company. Checked on 17 November 2026 against the consolidated text of Regulation (EU) 2023/1230 on EUR-Lex (version of 27 July 2026). The pending Omnibus IV amending proposal (2025/0134(COD)) was not adopted on that date; this guide follows the text in force. General information, not legal advice. It does not cover customs, tariffs or tax, or the rules of your own country.
The short answer
- The Regulation applies to the machine, not to where its builder is based. A machine built in the United States, Canada, Taiwan, India or anywhere else outside the EU must meet Regulation (EU) 2023/1230 when it is placed on the EU market or put into service in the EU from 20 January 2027 (Article 54). Until then the Machinery Directive 2006/42/EC applies.
- You are the manufacturer if you build the machine, or have it designed or built, and market it under your name or trade mark (Article 3(18)). The manufacturer's duties in Article 10 are yours wherever you are established: design to Annex III, technical documentation, conformity assessment, EU declaration of conformity, CE marking, instructions.
- Someone established in the EU must stand behind each machine: an importer, an authorised representative with your written mandate or, only where neither is established in the EU, a fulfilment service provider (Article 4 of Regulation (EU) 2019/1020; recital 8 of the Machinery Regulation). Name that operator before the first shipment.
- Machines in categories not listed in Annex I need no notified body. For those, you apply internal production control (module A, Annex VI) yourself (Article 25(4)). Only Annex I categories can need a notified body.
- The date is decided per unit, not per model or per order. For a unit made outside the EU, placing on the market is generally its release for free circulation in the EU, not the day it leaves your dock.
- The declaration and the instructions follow EU language rules: the declaration is translated into the language or languages required by the Member State where the machine is placed on the market, made available on the market or put into service (Article 21(2)), and the instructions are in a language easily understood by users, as determined by that Member State (Article 10(7)).
Who is who: eight common situations
The Regulation gives duties to economic operators: the manufacturer, the authorised representative, the importer and the distributor (Article 3(22)). Which of these your customer is depends on what it does with the machine, not on what the purchase order calls it.
| Situation | Who is who | What to do |
|---|---|---|
| An EU dealer or distributor buys your machines and resells them | You are the manufacturer. The EU company that places your machine on the EU market is the importer (Article 3(20)). | Give the importer what it must check before it places the machine on the market: the conformity assessment was carried out, the Annex IV, Part A technical documentation exists, the CE marking is on the machine, the required documents accompany it, and you have met Article 10(5), (6) and (8) (Article 13(2)). Its name, postal address and a website, e-mail or other digital contact go on the machine, or where that is not possible on the packaging or an accompanying document (Article 13(3)). |
| Your own EU subsidiary or sales company receives the machines and sells them | The subsidiary is a separate legal person established in the EU, so it is the importer. | The same Article 13 duties apply to it as to an independent importer, including keeping a copy of the declaration for at least 10 years and making sure the technical documentation can be made available to the authorities on request (Article 13(8)). |
| You sell directly to an EU factory that will use the machine itself | Your customer is an end user, and end users have no economic-operator obligations (Blue Guide 2022, section 3.8). There may be no importer at all. | The Commission's guidance on Article 4 of Regulation (EU) 2019/1020 says that a product shipped directly to an EU end user may not be offered without an EU-established operator. Options: an authorised representative under Article 12 whose written mandate also covers the Article 4(3) tasks of Regulation (EU) 2019/1020, or selling through an EU-established company that itself places the machine on the market as importer. A fulfilment service provider counts only for products it handles and only where no manufacturer, importer or authorised representative is established in the EU. |
| An EU dealer sells your machine under its own name or trade mark | The dealer is considered the manufacturer and takes on the Article 10 obligations (Article 17). The same applies if an importer or distributor modifies a machine already placed on the market in a way that may affect compliance. | The dealer, as manufacturer, must have the technical documentation and draw up the declaration (Articles 17 and 10(2)); settle in the contract how it obtains the documentation from you. |
| You supply partly completed machinery (for example a module that cannot work on its own) to an EU machine builder | You are the manufacturer of partly completed machinery (Article 11). It gets no CE marking under the Machinery Regulation. | Meet the relevant Annex III requirements, draw up the Annex IV, Part B documentation, the assembly instructions and the EU declaration of incorporation (Articles 11 and 22), and mark the identification and contact details. An EU importer of partly completed machinery has its own duties in Article 14. See the partly completed machinery guide. |
| A unit leaves your factory in December 2026 and clears EU customs after 20 January 2027 | It is generally placed on the EU market when it is released for free circulation, so it is generally a Regulation unit. | Plan by the date each unit reaches the EU market, not by the order date or the shipping date. Keep per-unit records: serial number, date placed on the market, declaration issued. See the Article 52 guide. |
| You show a machine at a trade fair in the EU before its EU paperwork is finished | Displaying it is allowed (Article 4(2)). | A visible sign must clearly indicate that the machine does not comply with the Regulation and will not be made available on the market until it has been brought into conformity. During demonstrations, adequate measures must be taken to ensure the protection of persons. |
| Your customer is in Northern Ireland or in Great Britain | Northern Ireland: the Regulation applies (Windsor Framework). Great Britain: UK law applies; from 20 January 2027 the CE route there is based on the Regulation's requirements (SI 2026/867). | For Northern Ireland, name an operator established in Northern Ireland or the EU. For Great Britain, the technical documentation, declaration and instructions must be in English. See the UK guide. |
What the manufacturer must do, step by step
Article 10 lists the manufacturer's obligations. They cannot be handed to the importer, and the design duty and the drawing up of the technical documentation cannot be given to an authorised representative either (Article 12(1)).
| Step | Source | Note for a builder outside the EU |
|---|---|---|
| 1. Check that the product is in scope and what it is | Articles 2 and 3 | Machinery, a related product (interchangeable equipment, safety component, lifting accessory and so on) or partly completed machinery. The paperwork differs for each. |
| 2. Check Annex I | Article 25(2)-(4); Annex I | Not listed: module A, no notified body. Listed in Part A or Part B: see the conformity assessment guide. A notified body must be notified under Regulation 2023/1230. |
| 3. Design and build to the essential health and safety requirements | Article 10(1); Annex III | Your risk assessment decides which Annex III requirements apply to your machine. The Annex III list shows every section and what is new. |
| 4. Draw up the technical documentation | Article 10(2); Annex IV, Part A | The Regulation does not say where it is kept. You keep it at the disposal of the market surveillance authorities for at least 10 years after the machine is placed on the market or put into service (Article 10(3)) and provide it, on a reasoned request, in a language the authority can easily understand (Article 10(10)). |
| 5. Carry out the conformity assessment | Article 10(2); Article 25 | Before the machine is placed on the market or put into service. |
| 6. Draw up the EU declaration of conformity | Article 10(2); Article 21; Annex V, Part A | It cites Regulation (EU) 2023/1230, not Directive 2006/42/EC, and every other EU act that applies and requires a declaration, in one document (Article 21(3)). Translate it into the language or languages required by the Member State (Article 21(2)). By drawing it up you assume responsibility for compliance (Article 21(4)). |
| 7. Affix the CE marking and the identification | Article 10(2), (5); Article 24 | Model, series or type, year of construction (the year the manufacturing process was completed) and any batch or serial number. See the CE marking guide. |
| 8. Put your contact details on the machine | Article 10(6) | Name, registered trade name or trade mark, postal address and a website, e-mail address or other digital contact, at a single contact point, in a language easily understood by users and market surveillance authorities. Your own address outside the EU is your address; the importer adds its own (Article 13(3)). |
| 9. Supply the instructions and the declaration | Article 10(7), (8) | Instructions may be digital under the conditions of Article 10(7). The declaration accompanies the machine, or the instructions give the internet address or machine-readable code where it can be accessed (Article 10(8)). See the digital instructions guide. |
| 10. Keep series production in conformity and act on problems | Article 10(4), (9) | Take account of design and production changes and of changes in the standards you declared against. If you have reason to believe a machine you placed on the market does not conform, take corrective action immediately; if it presents a risk, inform the national authorities of the Member States concerned. |
As of 17 November 2026 no harmonised standards had been cited in the Official Journal under Regulation (EU) 2023/1230 (see the Commission's harmonised standards page for machinery). Check the status again before you sign a declaration that cites standards.
Your EU-established operator: three options
A machine from a manufacturer outside the EU may be placed on the EU market only if an economic operator established in the EU is responsible for the tasks in Article 4(3) of Regulation (EU) 2019/1020 (recital 8 of Regulation (EU) 2023/1230).
| Operator | How it comes about | What it does | Limits |
|---|---|---|---|
| Importer | An EU-established person that places your machine from a third country on the EU market (Article 3(20)). No appointment is needed: it follows from what the company does. | Checks your paperwork before placing the machine on the market, adds its name and contact details, makes sure the instructions accompany the machine, keeps a copy of the declaration for at least 10 years and ensures the technical documentation can be made available (Article 13). | It does not affix the CE marking or issue the declaration in its own name for your machine, unless it becomes the manufacturer under Article 17. |
| Authorised representative | An EU-established person you appoint by written mandate (Articles 3(19) and 12(1)). | At least: keeps the technical documentation and the declaration at the disposal of the authorities for at least 10 years after placing on the market, provides information and documents on a reasoned request, and cooperates with the authorities on actions to eliminate risks (Article 12(2)). | Your duty to design and build to Annex III (Article 10(1)) and the drawing up of the technical documentation cannot be part of the mandate (Article 12(1)). To serve as your EU-established operator, the mandate must also cover the Article 4(3) tasks of Regulation (EU) 2019/1020. |
| Fulfilment service provider | An EU-established business that offers at least two of these services: warehousing, packaging, addressing and dispatching, without owning the product; postal, parcel delivery and freight transport services are excluded (Article 3(11) of Regulation (EU) 2019/1020). | Is responsible for the Article 4(3) tasks of Regulation (EU) 2019/1020. | Counts only where no manufacturer, importer or authorised representative is established in the EU. |
Worked example: one builder, two EU orders
Checklist for builders outside the EU
- List every unit that will reach the EU or Northern Ireland from 20 January 2027, by serial number and expected date of placing on the market.
- Classify each product: machinery, related product or partly completed machinery; then check Annex I for the conformity assessment route.
- Name the EU-established operator for every sale before the first shipment: importer, or an authorised representative with a written mandate.
- Update the risk assessment and the technical file to Annex III and Annex IV of the Regulation; record which standards or other technical specifications you applied.
- Replace the declaration template: Regulation (EU) 2023/1230 instead of Directive 2006/42/EC, Annex V, Part A structure, one declaration for all applicable EU acts.
- Check the rating plate: CE marking, type, serial number, year of construction, your name, postal address and digital contact; importer details where there is an importer; otherwise the name and postal address of your EU-established operator on the machine, its packaging, the parcel or an accompanying document (Article 4(4) of Regulation (EU) 2019/1020).
- Set the languages for the declaration, the instructions and the safety information for each Member State you ship to.
- Decide paper or digital instructions and, if digital, meet the Article 10(7) conditions (access marking, printable and downloadable, online for the lifetime and at least 10 years, paper on request at the time of purchase).
- Agree on the records: who keeps what for at least 10 years and how quickly an authority's request can be answered.
Not sure where you stand? The free readiness check takes about two minutes and lists the main changes with the Article or Annex each comes from.
Questions
Does the EU Machinery Regulation apply to US companies?
Yes, whenever a machine in its scope is placed on the EU market or put into service in the EU from 20 January 2027. The Regulation applies to the product, not to where the manufacturer is based. A US, Canadian or Asian builder that markets a machine under its own name is the manufacturer under Article 3(18) and carries the obligations of Article 10.
Do I need a notified body to sell a machine in Europe?
Only possibly, and only for categories listed in Annex I. If your category is not listed, you apply internal production control (module A, Annex VI) yourself (Article 25(4)): you draw up the technical documentation, carry out the assessment, sign the EU declaration of conformity and affix the CE marking without a notified body. For Annex I categories see our conformity assessment guide.
Do I need a company or a representative in the EU?
You do not need your own EU company, but an economic operator established in the EU must be responsible for the tasks in Article 4(3) of Regulation (EU) 2019/1020: an importer, an authorised representative with a written mandate or, only where neither is established in the EU, a fulfilment service provider. If you sell through an EU dealer, the dealer is normally the importer. If you sell directly to an EU end user, there may be no importer. The options left under Article 4(2) of Regulation (EU) 2019/1020 are then an authorised representative whose written mandate covers the Article 4(3) tasks or, where no manufacturer, importer or authorised representative is established in the EU, a fulfilment service provider established in the EU for the products it handles. You can also sell through an EU-established company that places the machine on the market as importer. See our importer guide.
Are machines built to North American standards accepted?
The Regulation does not ask which country's standards you used. It asks that the applicable essential health and safety requirements of Annex III are met and that the technical documentation shows it. Harmonised standards whose references are published in the Official Journal give a presumption of conformity with the requirements they cover (Article 20(1)); North American standards do not. If you apply other technical specifications, the technical documentation must describe them for each applicable requirement (Annex IV, Part A, point (f)). As of 17 November 2026 no harmonised standards had been cited in the Official Journal under Regulation (EU) 2023/1230.
My machines already carry CE marking under the Machinery Directive. What changes?
For each unit placed on the market or put into service from 20 January 2027, the declaration of conformity must be drawn up under Article 21 and Annex V of the Regulation, the technical documentation must follow Annex IV, the risk assessment must cover Annex III including its new points, and the machine must show a website, e-mail or other digital contact as well as the postal address (Article 10(6)). Units placed on the market under the Directive before that date may continue to be made available (Article 52(1)). See Regulation vs Directive.
Which language do the declaration and the manual have to be in?
The EU declaration of conformity is translated into the language or languages required by the Member State in which the machine is placed on the market, made available on the market or put into service (Article 21(2)). The instructions for use, the safety information and the information set out in Annex III must be in a language which can be easily understood by users, as determined by the Member State concerned (Article 10(7)). Do not assume that English is accepted; check the rule of each country you ship to.
Can the EU importer sign the declaration of conformity instead of me?
No. The manufacturer draws up the declaration and, by doing so, assumes responsibility for compliance (Articles 10(2) and 21(4)). The importer checks that it exists and keeps a copy (Article 13). An importer or distributor takes over the manufacturer's obligations only where it places the machine on the market under its own name or trade mark, or modifies it in a way that may affect compliance (Article 17).
Does the technical file have to be kept in the EU?
The Regulation does not say where it is stored. The manufacturer keeps the technical documentation and the declaration at the disposal of the market surveillance authorities for at least 10 years (Article 10(3)); the importer ensures that the documentation can be made available to them on request (Article 13(8)); and an authorised representative's mandate must allow it to keep the documentation at their disposal (Article 12(2)(a)). Agree in writing how a request from an authority will be answered and how fast.
Can I show a machine at a European trade fair before it complies?
Yes. Article 4(2) lets a product that does not comply be displayed at trade fairs, exhibitions and demonstrations, provided that a visible sign clearly indicates that it does not comply with the Regulation and will not be made available on the market until it has been brought into conformity. During demonstrations, adequate measures must be taken to ensure the protection of persons.
Related guides: Importers and authorised representatives · Regulation vs Directive · Transition (Article 52) · Declaration of conformity contents · Technical file under Annex IV · CE marking · Conformity assessment (Annex I) · Annex III requirements list · Digital instructions · UK machine builders · Free readiness check. We sell to businesses only; see Terms. Always verify against the official text of Regulation (EU) 2023/1230 on EUR-Lex.